Sony UVW1800 - Samy's DV & Edit

Back to Product Categories | Easy Quote

UVW1800 Betacam SP Deck

SONY UVW-1800.GIF (12969 bytes)

Full Editing Function
When connected to RS-422A equipped editing controllers such as the PVE-500, the UVW-1800 functions as an editing recorder for assemble or insert editing. Frame accurate editing is assured in both modes, thanks to the sophisticated servo control and built-in time code generator/reader. In the insert mode, video, audio CH-1, audio CH-2 and time code can be inserted independently or in any combination. In the assemble mode, all of the prerecorded signals are erased and replaced with new signals.

High Speed Picture Search
Provides a recognizable picture at various speeds over a range of up to 5 times normal speed in color, and up to 16 times normal speed in monochrome, both in forward and reverse.

Built-in Time Base Corrector
Provides stable pictures without any additional equipment. Advanced, high quality digital dropout compensation also ensures consistent picture performance.

Built-in Time Code Generator/Reader
The Betacam SP format has an independent time code track so that a longitudinal audio track does not have to be sacrificed for time code. The time codes conform to the SMPTE standard in which LTC and User-bits are provided. LTC is used to identify the absolute address of a frame, while User-bits are reserved for operator's use. Frame accurate A/B roll editing is possible using the LTC.

SPECIFICATIONS

GENERAL

Power requirements
AC 90 to 132 V, 48 to 64 Hz

Power Consumption
85W

Operating temperature
5oC to 40oC (41oF to 104oF)

Storage temperature
-20 oC to 60 oC (-4oF to 140oF)

Humidity
Less than 80% (relative humidity)

Tape speed
118.6 mm/s

Recording/playback time
More than 90 min with UVWT-90MLA, More than 30 min with UVWT-30MA

Fast forward time
Less than 3 min with UVWT-90MLA

Rewind time
Less than 3 min with UVWT-90MLA

Search speed (with optional SVRM-100) *1
SHUTTLE 15 steps, still to 16 times normal speed, forward and reverse - JOG Frame by frame, forward and reverse

VIDEO PERFORMANCE (Metal Particle Tape):

Bandwidth Luminance (50% modulation)
30 Hz to 4.0 MHz +1.0 -4.0dB

Color difference (50% modulation)
30 Hz to 1.5 MHz +1.0 -4.0dB

S/N ratio - Luminance(Component IN/OUT)
More than 49dB

Chrominance
AM - More than 52dB - PM - More than 52dB

K-factor (2T pulse)
Less than 3%

Y/C delay
Less than 30

AUDIO PERFORMANCE (Metal Particle Tape)

Frequency response
50Hz to 12.5kHz +2.0 -3.0dB

S/N ratio (at 3% distortion level)
More than 70dB

Distortion T.H.D.(at 1kHz reference level)
Less than 1.5%

Wow and flutter(DIN45507)
Less than 0.18% rms

SIGNAL INPUTS

REF VIDEO IN (BNC)
1.0vp-p, 75

VIDEO IN (BNC)
Composite video, 1.0Vp-p, 75 sync negative

COMPONENT IN 1 (12-pin male)

Luminance
1.0 Vp-p, 75 sync negative

Color difference
R-Y:07Vp-p, 75, B-Y:0.7Vp-p, 75

S-VIDEO IN
Y:1.0VP-P, 75 - C:0.286Vp-p (burst), 75

AUDIO IN CH-1/2 (XLR 3-pin female)
+4DbU *2, 600/10K Selectable, balanced

TIME CODE IN (BNC)
0.5v to 18Vp-p, 600

SIGNAL OUTPUTS:

VIDEO OUT 1 (BNC)
Composite video, 1.0Vp-p, 75, sync negative

VIDEO OUT 2 (BNC)
Composite video, 1.0Vp-p, 75, sync negative, with or without character insertion

COMPONENT OUT 1 (12-pin male)

Luminance
1.0Vp-p, 75, sync negative

Color difference
R-Y:0.7Vp-p, 75, B-Y:0.7Vp-p,75

COMPONENT OUT 2 (BNC x 3)

Luminance
1.0Vp-p, 75, sync negative

Color difference
R-Y:0.7Vp-p, 75, B-Y:0.7Vp-p,75

AUDIO LINE OUT (XLR 3-pin male) CH1/2
+4dBu, 600 balanced

AUDIO MONITOR OUT (Phono) CH1/2
-6 dBu

S-VIDEO OUT
Y:1.0VP-P, 75 - C:0.286Vp-p (burst), 75

TIME CODE OUT (BNC)
2.2Vp-p, 600

REMOTE IN/OUT
9-pin, female

TBC REMOTE
15-pin, male

CONTROLS
Mini jack

HEADPHONES
JM-60 headphone stereo jack

PROCESSOR ADJUSTMENT RANGE (with Optional BVR-50)

Video level
3 dB

Chroma level
3 dB

Setup level
0 to + 15 IRE

Hue
15o

System SC phase
360o p-p*3

System sync phase
-1 to +3s*4

Y/C delay
100 ns

Back to Product Categories | Easy Quote